Wednesday, September 19, 2007
Foreign Exchange - Forex
The foreign exchange (currency or forex or FX) market exists wherever one currency is traded for another। It is by far the largest financial market in the world, and includes trading between large banks, central banks, currency speculators, multinational corporations, governments, and other financial markets and institutions। The average daily trade in the global forex markets currently exceeds US$ 2–2।5 trillion। Retail traders (individuals) are a small fraction of this market and may only participate indirectly through brokers or banks.
What Is Forex Trading? Is It Right For Me?
What Is Forex Trading? Is It Right For Me?
Foreign Currency Exchange (FOREX) Trading is an exhilarating way to trade foreign currency in a market that runs 24 hours a day, five days a week. The Forex market is also the most volatile financial market in the world. It doesn’t have a physical location, trading floor or central exchange like the NYSE or futures market does, but instead it functions and operates amid a global network of banks with trades taking place over an electronic network or by phone. With its nearly nonstop currency market where Forex brokers trade in the currencies of the world, profits are made or lost depending on how various nations’ currencies increase or decrease relative to each other. Current, real time events can influence currency prices and thus Forex trading brokers typically keep track of worldwide events on a minute by minute, hour by hour basis each day.
Even though Forex trading is volatile, there are many things to like about it. Since the Forex Trading System is open 24 hours a day, the majority of each week, it allows for ample time and numerous trading opportunities around the clock. This means Forex Brokers are not under as much pressure to initiate a trade as quickly as if they were playing the stock market. Also, since world government currencies are very liquid, they are much easier to trade than other securities. As with the stock and option markets, profits can be made either way, whether in a rising or falling market. And since Foreign Currency Trading is volatile by nature, it can afford even more profit opportunities than other markets.
Of course a person’s Forex Trading Strategy should be to profit from the movement in currency values. As with any financial market, the more times a person “gets it right”, the more money they will make. In Forex or FX Trading, currency pairs are always used. FX Traders will try to determine, for instance, if the U.S. Dollar will rise in value over the British Pound, or vice versa. This is called a Currency Pair. Another trader may have some Forex information that informs them that the Euro will increase in value against the Dollar. They would then pay X amount of Dollars for X amount of Euros. As time went on and the Euro did strengthen against the Dollar then they could sell the Euros for even more Dollars than they had invested originally. Foreign Currency Exchange is essentially the simultaneous buying of one currency and the selling of another.
The Foreign Currency Exchange Market - What Is It All About?
Forex 101 - Foreign Currency Exchange Trading
Nearly everyone enjoys making money. More often than not, the more money we make the better we feel and the more confidence we have. These are good things as long as making money doesn’t get too emotional. If investing is treated like a business and most of the emotion is left behind, many people can do well with their investments.
Forex Trading, also known as FX Trading is another way you can make money in a trading environment. Everyone has heard of the New York Stock Exchange (NYSE) or the Chicago Mercantile Exchange (CME), each featuring either stock trading or options and futures trading. Forex Trading involves the buying and selling of currencies instead of stocks, bonds, options or futures. It is also different in that there is no physical floor or exchange area like there is in
Since the Spot Forex Market is the largest financial market in the world, it is also the most liquid. This means it is easy to get in and out of a position whenever you want. The more liquid a market is, the easier it is to initiate and fulfill a transaction. Of course, the objective when trading in any market is to buy low and sell high. With Online Forex Trading, a person buys and sells the currencies of other nations. If one believes the U.S. Dollar will strengthen against the EURO, for instance, they can buy Dollars now and sell them later at a profit. Currencies are traded in currency pairs and each currency is represented by a 3 letter code. Therefore, a rate, which consists of a pair of currency codes, will end up being a 6 letter code. For instance, USD/GBP is considered a currency pair with each containing three letters for a total of 6 in a rate.
Your objective as a Forex trader is to make sure you can correctly identify the current trend in the currencies you are trading and to make sure you are buying a currency which is appreciating in value and selling a currency which is depreciating. Slightly different than stock trading, you will utilize special software programs which allow you to participate in Online Forex Trading. You can also participate in Forex Trading Education at many Forex Trading company websites, and some allow you to test your Forex Trading Strategy in a “practice mode” before you actually use your own money.
Friday, September 7, 2007
Make Money Online
Wow! It’s already September, “Where did the year go?” Ok, the year isn’t over, but it’s getting there.
Anyway, the past couple of weeks have been very up and down. I have had car troubles (twice), birthday parties, etc. Our friend Mareike from Germany is visiting this month (came in on Monday), which is great, but has added to the craziness. Suffice it to say things have been really crazy. As you can imagine, I haven’t done my normal amount of online reading the last two-three weeks. Here are some of the Internet marketing/online business articles that I have read recently and thought you would enjoy:
Knowing When To Slow Down
This is such an important thing to remember. I almost always link to articles that I come across that emphasize this point.
Knowing When to Work Like a Dog and Go For Broke!
Wendy offers a nice counter point to the previous article by Dawud. Be sure to read all the way to the end of the post where Wendy reveals that she will be making a big announcement about a secret project she has been working on.
Creating A Quick HTML Sitemap To Increase Crawlability
Court writes about a really useful wordpress plug-in that I am definitely going to install in the next couple of weeks. It should help a little with the Search Rankings for this blog.
That was it for this week’s Internet marketing tips from the web.
Tuesday, September 4, 2007
1Click DVD Copy Pro 2.5.2.2
1Click DVD Copy Pro 2.5.2.2
1Click DVD Copy Pro 2.5.2.2
1CLICK DVD COPY - PRO is a fast, easy-to-use, full featured software for copying DVD movies onto DVD discs. The latest version now incorporates CPRx technology to ensure the highest level of success copying the latest generation of DVD movies.You now have complete control over the final copy. Use the Copy Presets™ or the more advanced features to select what content will be copied and how much compression will be used. With 1CLICK DVD COPY - PRO, you can make a perfect copy with just one click.
Windows Vista Compatible!
CPRx™ technology for copying new DVD movies.
Copy Presets™ - One click preset for each type of DVD copy.
Dual Layer media support.
Preview the movie, extras and menus.
Include or exclude movie and menus based on preview.
Select individual audio, video, and subtitles streams.
Control the amount of video compression used.
Copy episode DVDs (television programs on DVD).
Copy a movie to your hard drive - great for laptops.
Supports copying of multi channel audio (Dolby Digital 5.1, DTS).
Supports both NTSC and PAL movies.
Free software updates and technical support for a year.
2.5.2.0 (June 7, 2007) Bug fix: Changes to the "Preferred Audio Language" were ignored and only the default language of the DVD was enabled. This bug was introduced in version 2.5.1.8 and has now been fixed.
To deal with movies like "Apocalypto" (which contain unspecified audio languages), the default setting (in the "Preferred Audio Language" list) for unspecified audio languages has been changed to: "checked".
Search The Software on google.com and Download
Enjoy:D
Making Windows Xp Start 60% Faster, tutorial…
Making Windows Xp Start 60% Faster, tutorial…
Making Windows Xp Start 60% Faster, tutorial…
Whenever you start your computer, you are faced with a few moments of thumb twiddling while Windows XP boots and prompts you to log on. Although you should expect to wait for a few moments, sometimes Windows XP seems to boot rather slowly. In fact, you may notice that over a period of time the PC that used to roar to life seems a bit sluggish instead. Fortunately, you can perform several techniques that help Windows XP get the bootup speed you want. This chapter explores how to put these techniques to work.
Stopping Unneeded Startup Services
Along with the core operating system and programs that Windows XP runs when it starts, there is also a host of services involved. Many of these services are necessary for Windows XP to operate correctly. However, many of them are for features in Windows XP that you may not use at all. You can peruse the services and disable any service that you do not want to run. The fewer services that run, the more quickly Windows XP will boot.
Caution:
Exercise caution when stopping services. If you do not know what a service does or are unsure of the ramifications of stopping the service, leave it alone. Some services are critical to Windows XP’s operations, so make sure you understand what the service is before you disable it.
To reduce the number of services that start on bootup, you can access two different areas of Windows XP. The first is the System Configuration Utility. The Services tab shows you the services that start when the computer boots.
You can stop a service from starting by simply clearing the check box next to the service and clicking OK. However, before you do so, there is another way to disable services that you may prefer because the interface gives you more information about the service in question.
Open Control Panel/Administrative ToolsServices or else select Start/Run, type services.msc, and click OK. Either way, you see the Services console.
I prefer to use the Services console instead of the System Configuration Utility because it describes what the service does. Additionally, you can double-click a service and examine its properties.
Notice the Startup Type column in Figure 4-2. This information lists whether the service is automatic or manual. Manual services are only started in Windows XP when you start a process that requires the service. Some other process may require the service that has a “dependency” relationship with it; in this case, the dependency service will start, as well. Because these services do not start automatically when you boot Windows XP, you do not need to do anything with manual services.
However, all services listed as automatic start when Windows XP boots. These are the services that increase boot time. As I have mentioned, many of them are necessary and important, so you should not stop automatic services from booting unless you are sure of the ramifications. You can get this information by looking at the Description column. Here’s a quick look at common services you may want to live without:
Automatic Updates: This service enables Windows XP to check the Web automatically for updates. If you don’t want to use Automatic Updates, you can disable the service. You can always check for updates manually at the Windows Update Web site.
Computer Browser: If your computer is not on a network, you don’t need this service. If you are on a network, leave it alone.
DHCP Client: If you are not on a network, you do not need this service. If you are on a small workgroup, you can still increase boot time by configuring manual IP addresses (which I explore later in this chapter).
DNS Client: If you are not on a network, you do not need this service. If you are, leave it alone.
Error Reporting and Event Log: You don’t have to use these services but they can be very helpful, so I would leave them configured as automatic.
Fax: If you don’t use your computer for fax services, you can disable this one.
Help and Support: If you never use the Windows XP Help and Support Center (found on the Start menu), you can disable this service.
IMAPI CD-Burning COM: This service enables you to burn CDs on your computer. If you never burn CDs, you can disable the service.
Indexing Service: Your computer keeps an index of files but if you rarely search for files, the service is just a resource hog. You can stop it and turn the service to manual.
Windows Firewall/Internet Connection Sharing: If you do not use these features, you can disable them.
Infrared Monitor: If you do not use infrared devices, you can disable this service.
Messenger: This service sends alert messages on a local area network (it is not the same as Windows Messenger). If you are not on a network, you can disable this service.
Print Spooler: If you do not do any printing from the computer, you can disable this service. If you print, make sure you leave it as automatic.
Remote Registry: This service allows remote users to modify the Registry on your computer. If you are not on a network, you can disable this service.
System Restore Service: This service allows you to use System Restore. If you have turned off System Restore anyway, you do not need to turn off the service. If you do, you turn off System Restore.
Themes: If you do not use themes, you can disable this service.
Windows Image Acquisition: If you do not use scanners or digital cameras, you can disable this service.
Wireless Zero Configuration: If do not use wireless networking devices, you can disable this service.
You may have a number of other automatic services, depending on software and other configurations on your computer. So it’s a good idea to look through the services and learn more about them. If you double-click a service, a Properties dialog box appears
Notice that on the General tab, you see a Startup Type drop-down menu. If you want to change an automatic service to manual, select Manual here and click OK. As a general rule, don’t disable a service unless you are sure you will never use it. However, manual configuration allows the service to be started when you find it necessary, thus speeding up your boot time.
However, before you change a service to manual, look at the Dependencies tab (see Figure 4-4). This tab shows you which other services depend upon the service you are considering changing.
Keep in mind that services are necessary for the vast functionality you get with Windows XP. Change only those services that you understand and do not use. How you use your Windows XP computer should be the best guide in terms of optional startup services.
--------------------
Making Windows Xp Start 60% Faster, tutorial…
Whenever you start your computer, you are faced with a few moments of thumb twiddling while Windows XP boots and prompts you to log on. Although you should expect to wait for a few moments, sometimes Windows XP seems to boot rather slowly. In fact, you may notice that over a period of time the PC that used to roar to life seems a bit sluggish instead. Fortunately, you can perform several techniques that help Windows XP get the bootup speed you want. This chapter explores how to put these techniques to work.
Stopping Unneeded Startup Services
Along with the core operating system and programs that Windows XP runs when it starts, there is also a host of services involved. Many of these services are necessary for Windows XP to operate correctly. However, many of them are for features in Windows XP that you may not use at all. You can peruse the services and disable any service that you do not want to run. The fewer services that run, the more quickly Windows XP will boot.
Caution:
Exercise caution when stopping services. If you do not know what a service does or are unsure of the ramifications of stopping the service, leave it alone. Some services are critical to Windows XP’s operations, so make sure you understand what the service is before you disable it.
To reduce the number of services that start on bootup, you can access two different areas of Windows XP. The first is the System Configuration Utility. The Services tab shows you the services that start when the computer boots.
You can stop a service from starting by simply clearing the check box next to the service and clicking OK. However, before you do so, there is another way to disable services that you may prefer because the interface gives you more information about the service in question.
Open Control Panel/Administrative ToolsServices or else select Start/Run, type services.msc, and click OK. Either way, you see the Services console.
I prefer to use the Services console instead of the System Configuration Utility because it describes what the service does. Additionally, you can double-click a service and examine its properties.
Notice the Startup Type column in Figure 4-2. This information lists whether the service is automatic or manual. Manual services are only started in Windows XP when you start a process that requires the service. Some other process may require the service that has a “dependency” relationship with it; in this case, the dependency service will start, as well. Because these services do not start automatically when you boot Windows XP, you do not need to do anything with manual services.
However, all services listed as automatic start when Windows XP boots. These are the services that increase boot time. As I have mentioned, many of them are necessary and important, so you should not stop automatic services from booting unless you are sure of the ramifications. You can get this information by looking at the Description column. Here’s a quick look at common services you may want to live without:
Automatic Updates: This service enables Windows XP to check the Web automatically for updates. If you don’t want to use Automatic Updates, you can disable the service. You can always check for updates manually at the Windows Update Web site.
Computer Browser: If your computer is not on a network, you don’t need this service. If you are on a network, leave it alone.
DHCP Client: If you are not on a network, you do not need this service. If you are on a small workgroup, you can still increase boot time by configuring manual IP addresses (which I explore later in this chapter).
DNS Client: If you are not on a network, you do not need this service. If you are, leave it alone.
Error Reporting and Event Log: You don’t have to use these services but they can be very helpful, so I would leave them configured as automatic.
Fax: If you don’t use your computer for fax services, you can disable this one.
Help and Support: If you never use the Windows XP Help and Support Center (found on the Start menu), you can disable this service.
IMAPI CD-Burning COM: This service enables you to burn CDs on your computer. If you never burn CDs, you can disable the service.
Indexing Service: Your computer keeps an index of files but if you rarely search for files, the service is just a resource hog. You can stop it and turn the service to manual.
Windows Firewall/Internet Connection Sharing: If you do not use these features, you can disable them.
Infrared Monitor: If you do not use infrared devices, you can disable this service.
Messenger: This service sends alert messages on a local area network (it is not the same as Windows Messenger). If you are not on a network, you can disable this service.
Print Spooler: If you do not do any printing from the computer, you can disable this service. If you print, make sure you leave it as automatic.
Remote Registry: This service allows remote users to modify the Registry on your computer. If you are not on a network, you can disable this service.
System Restore Service: This service allows you to use System Restore. If you have turned off System Restore anyway, you do not need to turn off the service. If you do, you turn off System Restore.
Themes: If you do not use themes, you can disable this service.
Windows Image Acquisition: If you do not use scanners or digital cameras, you can disable this service.
Wireless Zero Configuration: If do not use wireless networking devices, you can disable this service.
You may have a number of other automatic services, depending on software and other configurations on your computer. So it’s a good idea to look through the services and learn more about them. If you double-click a service, a Properties dialog box appears
Notice that on the General tab, you see a Startup Type drop-down menu. If you want to change an automatic service to manual, select Manual here and click OK. As a general rule, don’t disable a service unless you are sure you will never use it. However, manual configuration allows the service to be started when you find it necessary, thus speeding up your boot time.
However, before you change a service to manual, look at the Dependencies tab (see Figure 4-4). This tab shows you which other services depend upon the service you are considering changing.
Keep in mind that services are necessary for the vast functionality you get with Windows XP. Change only those services that you understand and do not use. How you use your Windows XP computer should be the best guide in terms of optional startup services.
--------------------
making FIREFOX run at lightning speed, full speed firefox browser
follow these steps carefully...............
1. First in the URL bar, Type "about:config". This will bring up a list of commands and variables you can edit
2. The second step is to put "network.http.pipelining" in the filter and change the value to "true".
3. After that you will want to put "network.http.proxy.pipelining" in the filter.
Like the last one, make that value set to "true" also.
4. Next, locate "network.http.pipelining.maxrequests" and change the value to some number higher, say 10,20 or even 30, it would make up to 10,20 or 30 requests at once.
5. The last step is to right click anywhere and select "New" then "Integer". Name it "nglayout.initialpaint.delay" and make its value "0". This will make the browser respond faster on the information of the websites it receives.
6. Close out FireFox (make sure FireFox is closed by viewing the Task Manager) and restart it and enjoy the new mega speed
now your firrefox is all set to be superfast
--------------------
1. First in the URL bar, Type "about:config". This will bring up a list of commands and variables you can edit
2. The second step is to put "network.http.pipelining" in the filter and change the value to "true".
3. After that you will want to put "network.http.proxy.pipelining" in the filter.
Like the last one, make that value set to "true" also.
4. Next, locate "network.http.pipelining.maxrequests" and change the value to some number higher, say 10,20 or even 30, it would make up to 10,20 or 30 requests at once.
5. The last step is to right click anywhere and select "New" then "Integer". Name it "nglayout.initialpaint.delay" and make its value "0". This will make the browser respond faster on the information of the websites it receives.
now your firrefox is all set to be superfast
--------------------
A HIDDEN FIREWALL THAT SLOWS YOUR DOWNLOAD
ONLY IF U HAVE WINDOWS XP
Go Start>Control Panel>select Switch to Classic view
then
Open up your “Network Connectionsâ€. Right click on your internet connection or LAN connection and select “Propertiesâ€.
->Select the “Advance†tab
If the “Internet Connection Firewall†is ticked then this might be the reason for slow downloads. Also it might be the reason for the status light to stay yellow, even though you have allowed your current firewall to allow your client to access the internet. Try it out and tell me if that was the problem, beacuse it was mine.
Go Start>Control Panel>select Switch to Classic view
then
Open up your “Network Connectionsâ€. Right click on your internet connection or LAN connection and select “Propertiesâ€.
->Select the “Advance†tab
If the “Internet Connection Firewall†is ticked then this might be the reason for slow downloads. Also it might be the reason for the status light to stay yellow, even though you have allowed your current firewall to allow your client to access the internet. Try it out and tell me if that was the problem, beacuse it was mine.
Using an Ethernet connection and File SharingHow to fix the slow file transfers problem in Vista
When moving from Windows XP to Vista, I noticed that file transfers were much slower. Fortunately, I kept my old operating system too, but that's not a solution - to use Windows XP every time you have to transfer large files from a partition to another. So... how do we fix this issue?
Since the cause of slow file operations in vista is Remote Differential Compression, we have to disable this feature. This is how to do it...
Press the Start Orb.
Open the Control Panel.
Go to the Programs and Programs and features applet.
Select Turn on or off Windows features in the left pane.
Here, uncheck Remote Differential Compression.
Now, it's done! File copy and move operations will be much faster.
Since the cause of slow file operations in vista is Remote Differential Compression, we have to disable this feature. This is how to do it...
Press the Start Orb.
Open the Control Panel.
Go to the Programs and Programs and features applet.
Select Turn on or off Windows features in the left pane.
Here, uncheck Remote Differential Compression.
Now, it's done! File copy and move operations will be much faster.
To remove a software, just click on the Start orb, go to Control Panel and choose Uninstall a program. Here there’s a list with programs that you can uninstall, each containing information about the Publisher (who made the software), when was the software installed and the size of it. Click on the application you want to remove and select Uninstall.Mind Hacks: Tips & Tools for Using Your Brain
Mind Hacks: Tips & Tools for Using Your BrainThe brain is a fearsomely complex information-processing environment–one that often eludes our ability to understand it. At any given time, the brain is collecting, filtering, and analyzing information and, in response, performing countless intricate processes, some of which are automatic, some voluntary, some conscious, and some unconscious.
Cognitive neuroscience is one of the ways we have to understand the workings of our minds. It’s the study of the brain biology behind our mental functions: a collection of methods–like brain scanning and computational modeling–combined with a way of looking at psychological phenomena and discovering where, why, and how the brain makes them happen. Want to know more? Mind Hacks is a collection of probes into the moment-by-moment works of the brain. Using cognitive neuroscience, these experiments, tricks, and tips related to vision, motor skills, attention, cognition, subliminal perception, and more throw light on how the human brain works. Each hack examines specific operations of the brain. By seeing how the brain responds, we pick up clues about the architecture and design of the brain, learning a little bit more about how the brain is put together. Mind Hacks begins your exploration of the mind with a look inside the brain itself, using hacks such as “Transcranial Magnetic Stimulation: Turn On and Off Bits of the Brain” and “Tour the Cortex and the Four Lobes.” Also among the 100 hacks in this book, you’ll find:
-Release Eye Fixations for Faster Reactions
-See Movement When All is Still
-Feel the Presence and Loss of Attention
-Detect Sounds on the Margins of Certainty
-Mold Your Body Schema
-Test Your Handedness
-See a Person in Moving Lights
-Make Events Understandable as Cause-and-Effect
-Boost Memory by Using Context
-Understand Detail and the Limits of Attention
Steven Johnson, author of “Mind Wide Open” writes in his foreword to the book, “These hacks amaze because they reveal the brain’s hidden logic; they shed light on the cheats and shortcuts and latent assumptions our brains make about the world.” If you want to know more about what’s going on in your head, then Mind Hacks is the key–let yourself play with the interface between you and the world.
Click Here to Download the book for free
Ed Husain - The Islamist
Amazon.com Review
A truly outstanding book that works on so many levels, a personal journey, a review of contemporary Islamic life in Britain, a historical reference, an assessment of Islamic politics and many more. Husain's personal journey into extreme Islamic politics is quite frightening simply because it seemed so rapid and easy and also that extremist politics does seem to dominate the thinking of the young Muslims that he mixes with. If the type of thinking that he describes is half as dominant as this book seems to suggest then as a country we have a lot to worry about and more horrors like the attacks on London in 2005 are inevitable.
Having said that, I left this book with a new respect for the type of Islam that Husain eventually came to and indeed a respect for the picture of The Prophet that he paints. Stripped of the political manoeuvrings he shows Islam can be a compassionate and caring faith and one that has so much good in it that make the recent behaviours done it it's name all the more distasteful.
This book has given me more to think about than anything else I have read in the last couple of years.
A truly outstanding book that works on so many levels, a personal journey, a review of contemporary Islamic life in Britain, a historical reference, an assessment of Islamic politics and many more. Husain's personal journey into extreme Islamic politics is quite frightening simply because it seemed so rapid and easy and also that extremist politics does seem to dominate the thinking of the young Muslims that he mixes with. If the type of thinking that he describes is half as dominant as this book seems to suggest then as a country we have a lot to worry about and more horrors like the attacks on London in 2005 are inevitable.
Having said that, I left this book with a new respect for the type of Islam that Husain eventually came to and indeed a respect for the picture of The Prophet that he paints. Stripped of the political manoeuvrings he shows Islam can be a compassionate and caring faith and one that has so much good in it that make the recent behaviours done it it's name all the more distasteful.
This book has given me more to think about than anything else I have read in the last couple of years.
Download and enjoy the books..
Prime Numbers: The Most Mysterious फिगुरेस in Math (Read 169 times)
Prime Numbers: The Most Mysterious Figures in MathBook Details
Author: David Wells
Hardcover: 288 pages
Publisher: Wiley (May 18, 2005)
Language: English
ISBN-10: 0471462349
ISBN-13: 978-0471462347
Book Description
A fascinating journey into the mind-bending world of prime numbers
Cicadas of the genus Magicicada appear once every 7, 13, or 17 years. Is it just a coincidence that these are all prime numbers? How do twin primes differ from cousin primes, and what on earth (or in the mind of a mathematician) could be sexy about prime numbers? What did Albert Wilansky find so fascinating about his brother-in-law’s phone number?
Mathematicians have been asking questions about prime numbers for more than twenty-five centuries, and every answer seems to generate a new rash of questions. In Prime Numbers: The Most Mysterious Figures in Math, you’ll meet the world’s most gifted mathematicians, from Pythagoras and Euclid to Fermat, Gauss, and Erd¿o¿s, and you’ll discover a host of unique insights and inventive conjectures that have both enlarged our understanding and deepened the mystique of prime numbers. This comprehensive, A-to-Z guide covers everything you ever wanted to know—and much more that you never suspected—about prime numbers, including:
* The unproven Riemann hypothesis and the power of the zeta function
* The “Primes is in P” algorithm
* The sieve of Eratosthenes of Cyrene
* Fermat and Fibonacci numbers
* The Great Internet Mersenne Prime Search
* And much, much more
कमेंट्स For More
HDD Regenerator 1.51, Rectify all the bad sectors of your Hard Drive
Hard disk drive is an integral part of every computer. It stores all your information. One of the most prevalent defects of hard drives are bad sectors on the disk surface. Bad sectors are a part of the disk surface which contains not readable, but frequently necessary information. If your hard drive is damaged by bad sectors, it is not only becomes unfit for use, but also you risk losing information stored on it. If you suspect that your hard disk drive is damaged and contains bad sectors, you have difficulties to copy data from your disk, your operating system is unstable or you unable to boot to Windows altogether - don�t rush to throw out your disk and don�t think that your important information is irretrievably lost. Take advantage of HDD Regenerator - the unique program for regeneration of hard disk drives. HDD Regenerator will regenerate your hard drive by magnetic reversal. As a result, not readable damaged information will be restored. With all this going on, the existing information will not be lost! HDD Regenerator regenerates hard disk drives exclusively at physical level. It ignores file system and can be used with FAT, NTFS or any other file system, and also with unformatted or unpartitioned disks. During regeneration, the disk structure is not changed and the existing data is not affected.
Search And DOwnload...
Enjoy:);):D
Monday, September 3, 2007
Know The Secret of Nokia---All About Nokia Codes...Soon To come..
Input of all "indications" directly one behind the other - without "blanks" (these serve only the better overview).
Code
last change Function/description/information
*# 06 #
16.12.03 Seriennummer/IMEI indicates (actually also a GSM is code - see further below)
*# 0000 #
16.12.03 SW version announcements (e.g. V3.42.1, 16-10-03, Nhl-10)
*# 2820 #
16.12.03 Bluetooth (BT) device address indicate.
xx #
16.12.03 Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #)
A/from key
16.12.03 Short pressing for menu for switching between profiles
Menu key
16.12.03 Long pressing for "task manager" - switching between active programs (with "C" key programs can be terminated.)
Menu quick access
18.01.04 Over in the menu e.g. to point 3.1 arrive simply 31 enter (if the third symbol a file is opened is for these and then in it started the first Programm/Icon).
Autostart go around
28.12.03 When switching on of the Handys on to the pin inquiry the key "ABC" (pin) comes the whole time keeps pressed - this is to ignore (allegedly) the autoinitialization programs.
#
15.02.04 Do not switch between different lines (AS)... goes e.g. with Austrian ONE Handys (see nose cunning). I could not try out however also, since I did not have 2 lines on the SIM map.
12345
16.12.03 ... is according to standard set the Nokia nokia-Sicherheitscode.
0000
16.12.03 ... is according to standard those (with Vodafone windshield frame section) set 2te pin and that standard net code/password
With D1 the standard net code is the last 4 numbers of the card number without HLR e.g. 99999234-5/55 - > 2345
0 - for a long time press
25.10.04 If one the "0" in the main menue for a long time presses those homepage of the standard WAP connection is called.
Caution - starting from here the codes are "dangerous"
*#7370925538#
* # of res wallet #
28.12.03 ... is to be deleted the code around the "wallet"! Input like normal telephone number (not in wallet code inquiry windows).
NOTE! Afterwards the "wallet" is empty, can again be put on however with new code.
*# 7780 #
17.01.04 The "original attitudes" and telephone re-establishes is again started (an appropriate inquiry and it follow before must the sicherheitscode be entered).
NOTE! Afterwards various "attitudes" are away - among other things these:
·1 Points of entrance (Provider dependent points of entrance and attitudes)
·2 Bluetooth attitudes
·3 Favorite
·4 Allocation of the two keys (beside Navi keys) in the main menue
·5 Profiles are "neglected" (as with distribution) - still there however new bell tones, etc. are...
·6 SMS/MMS/E Mail attitudes
·7 Logos and spielstaende (allegedly) also deleted...
Programs, calendars and contacts, etc. not changed...
Also the sicherheitscode remains.
This putting back goes also via menu under "attitudes - general - original telephone once.".
*# 7370 #
21.01.04 Soft format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a software RESET. (however still another inquiry comes before.)
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!
This is "only" a soft format... Hard format with "green, 3, *"... see below.
Green, * 3
21.01.04 Hard format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a RESET.
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!
Proceeding: Equipment switch off, which keep "green key" (take off) at the same time pressed, "*" and to "3" key and switch the equipment on (the keys thereby keep further pressed)... to "Formatting" on the display appears...
If that does not function, then equipment for 1 hour switch off, Akku so for a long time rausnehmen and again try.
"only" virtual the memory is generally cleared - genuine formatting can take place only in a Nokia service center, if the Fash is deleted there and/or new L.G. is installed.
Mixed
16.12.03 * # 92702689 #, then switch - system menu off (goes with me not)
The following code do not fold (with me also):
* EFR0 # (* 3370 #) EFR activate (EFR = Enhanced Full rate Coding - language optimization)
# EFR0 # (# 3370 #) EFR switch off
* HRC # (* 4720 #) HRC switch on (HRC = helped rate Coding - language compression)
# HRC0 # (# 4720 #) HRC switch off
SIM LOCK
12.01.04 Simlock status query: (use "*" the key over "p,w" and "+" indications to enter)
# pw+ 1234567890 +1 # Provider LOCK status
# pw+ 1234567890 +2 # network LOCK status
# pw+ 1234567890 +3 # Country LOCK status
# pw+ 1234567890 +4 # Sim Card LOCK status
The code 1234567890 must be computed with a program e.g. SmartDCT4Calc and/or DCT 4 code Calculator from IMEI, etc.... Information look for if necessary here: www.gsm free.com or www.iphone forum.org
Info. to Simlock: SIM LOCK makes it for the offerer/network carriers possible, subsidized (verguenstigte) Handys to offer. Thus one makes oneself if necessary punishable if one SIM LOCK deactivated - in addition the warranty can purged. I take over for it no adhesion or responsibility!
GSM code ... should function at each Handy - however Netz(betreiber)abhaengig are... and "harmless"...
Generally applies: First enter code, "send" afterwards (<> press) and one moment wait...
Good Links/Sites in addition: www.handy sms.de/forum/gsm codes.html or www.mobilemania.de/facts+infos/gsmcodes.php
SMS Tipps
27.01.04 To Tipps & cheat about SMS (with appropriate codes) are immediately in the FAQ list .
For example for the topic: SMS "retard" and/or deferred send, acknowledgment of receipt, reports...
Mark more simply
01.03.04 To Tipps & cheat to the topic "mark" e.g. with SMS entrance.
Over simply to mark simply the "pin" (ABC key) hold some e.g. SMS and move then Jostick downward.
Call number transmission
01.01.04 * 31 # - { CLIR - Calling LINE identification Restriction switches on for the general call number transmission }
# 31 # - switch off the general call number transmission
# 31 # [ telephone number ] - with the next call suppress the own call number (thus temporary)
* 31 # [ telephone number ] - with the next call transfer own call number (thus temporary)
* # 31 # - status query (of call number transmission)
# 31 * [ telephone number ] - own call number show, although receiving station switched call number suppression on. (is not usually de-energised of the Netz(betreiber).)
* 30 # - switch { TIE-clip - Calling LINE identification presentation for the announcement on of the call number of the caller }
# 30 # - switch off
* # 30 # - status query
This also partly goes with 6600 via Men: Attitudes - calls - own No. send...
The following codes are not supported by most Netz(betreibern):
* # 76 # - announcement of the call number, under which one reached the calling (not its call number during rufumleitung!) { COLP - COonnected LINE identification presentation }
* 76 # - switch on
# 76 # - switch off
* # 77 # - announcement of the call number, under which the caller reached me (not my call number during rufumleitung meinerseits!) { COLR - COnnected LINE identification Restriction }
* 77 # - switch on
# 76 # - switch off
Call bypasses (call Forwarding)
01.01.04 Bypass code (U):
U=21 always
U=61 retards
U=62 not attainable
U=67 occupies
U=61, 62, 67 can be parallel active
U=21 - > and then no more call signaling overwrites U=61,62 and 67!
Service code (D):
Not all nets support all services
D=10 language and fax (all calls)
D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services
D=21 all asynchronous services
D=22 all synchronous services
D=23 3.1 kHz GSM of language services
D=24 all synchronous POINT ton of POINT DATA inclusive. PADs
D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D=26 DATA pack exchange on the left of inclusive. PADs
D=27 services thru PADs
D=29 12 Kbps digitally left
** U * [ goal call number ] * D # - bypass switch on
Input without * D means bypass of all services
## U ** D # - switch bypass off (individual bypasses and service code)
Without ** D all services are switched off to bypasses
## 002 # (all bypasses for all service codes switch off)
## 004 # (switch off only U=61, 62, 67 and for all service codes - thus ", not attainable, nonacceptance "occupies)
* # U ** D # - status of the bypasses query:
Input without ** D queries all services and bypasses
Bypass in the speaking and/or fax box: Number in bypass procedure with D=11 and/or 13 enter
Goal call number (e.g. D2-Netz: +49,172 xxx) and Handynummer without preselection (if necessary 172 replaces) enter.
Tap: During switched on rufumleitung "with occupied" being able "to reject" calls by one the red key during "to ring" presses. The caller is then passed on to the goal call number of the occupying bypass (e.g. mailbox).
Type for waiting period during rufumleitung 61: ** 61 * [ goal call number ] * 11 * [ time in sec. (5 to 30) ] #
This also partly goes with 6600 via menu: Attitudes - rufumleitungen -...
Knock/stops/parks/faults
01.01.04 Knocks is signaling a secondary call during a current discussion
* 43 # - switch on
# 43 # - switch off
* # 43 # - status query
This also partly goes with 6600 via menu: Attitudes - calls - knocking...
0 <> - reject while the discussion a knocking
1 <> - discussion terminate, knocking discussion accept
certain discussion (y) terminate 1 (y) <>
2 <> - discussion park, knocking discussion accept
certain discussion and new discussion leads 2 parks (y) <>
0 <> - caller the busy condition signal
This also partly goes with 6600 via menus existing during the discussion.
Call barrier
01.01.04 Possible only if bypass of the service code is switched off.
Check code (S):
S=33 all outgoing transmissions
S=331 outgoing abroad
S=332 outgoing abroad except home
S=35 all arriving transmissions
S=351 all arriving abroad
Special check codes (s) delete:
Switch off only in connection with the procedure
S=330 check code status outgoing & arriving transmissions switch off
S=333 check code status outgoing transmissions switch off
S=353 check code status arriving transmissions switch off
Service code (D):
Not all nets support all services
D=10 language and fax (all calls)
D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services
D=21 all asynchronous services
D=22 all synchronous services
D=23 3.1 kHz GSM of language services
D=24 all synchronous POINT ton of POINT DATA inclusive. PADs
D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D=26 data packet exchange links incl. PADs
D=27 services thru PADs
D=29 12 Kbps digital link
* S * [Passwort] * D # - einschalten der Anruf-Sperre
# S * [Passwort] * D # - ausschalten der Anruf-Sperre
*# S # - Status der Anruf-Sperre abfragen
Passwort für Handy Sperre ändern:
** 03 ** [altes Passwort] * [neues Passwort] * [neues Passwort wiederholen] #
** 03 * 330 *[altes Passwort] * [neues Passwort] * [neues Passwort wiederholen] #
Dies geht beim 6600 auch teilweise via Menü: Einstellungen - Anrufsperre ...
PIN ändern
01.01.04 ** 04 * [alte PIN] * [neue PIN] * [neue PIN wiederholen] #
** 042 * [alte PIN 2] * [neue PIN 2] * [neue PIN 2 wiederholen] #
PIN entsperren: ** 05 * [PUK] * [neue PIN] * [neue PIN wiederholen] #
PIN 2 entsperren: ** 052 * [PUK2] * [neue PIN 2] * [neue PIN 2 wiederholen] #
Dies geht beim 6600 auch teilweise via Menü: Einstellungen - Sicherheit - Telefon und SIM ...
Diverse Codes
02.02.04 Die folgenden Codes klappen nur in einigen (wenigen) Netzen/Netzbetreibern ... leider z.B. nicht im Vodafone D2 Netz (in Deutschland):
*#100# - Eigene Nummer (Own Number)
*#101# - HLR Nummer
*#102# - Switch Nummer
*#103# - Zeit im Netz (Network Time)
*#104# - Anrufbeantworter Nummer (Voice mailbox number)
*#105# - Switch number
*#147# - Letzter Anrufer (Last Caller)
#646# - Minutes Used: (646 spells 'MIN')
*#1345# or *174# - Vodafone Prepaid balance
*78 - Do not disturb - nur in Nord America in GSM und CDMA Netzen möglich
*79 - Cancel (s.o.)
Code
last change Function/description/information
*# 06 #
16.12.03 Seriennummer/IMEI indicates (actually also a GSM is code - see further below)
*# 0000 #
16.12.03 SW version announcements (e.g. V3.42.1, 16-10-03, Nhl-10)
*# 2820 #
16.12.03 Bluetooth (BT) device address indicate.
xx #
16.12.03 Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #)
A/from key
16.12.03 Short pressing for menu for switching between profiles
Menu key
16.12.03 Long pressing for "task manager" - switching between active programs (with "C" key programs can be terminated.)
Menu quick access
18.01.04 Over in the menu e.g. to point 3.1 arrive simply 31 enter (if the third symbol a file is opened is for these and then in it started the first Programm/Icon).
Autostart go around
28.12.03 When switching on of the Handys on to the pin inquiry the key "ABC" (pin) comes the whole time keeps pressed - this is to ignore (allegedly) the autoinitialization programs.
#
15.02.04 Do not switch between different lines (AS)... goes e.g. with Austrian ONE Handys (see nose cunning). I could not try out however also, since I did not have 2 lines on the SIM map.
12345
16.12.03 ... is according to standard set the Nokia nokia-Sicherheitscode.
0000
16.12.03 ... is according to standard those (with Vodafone windshield frame section) set 2te pin and that standard net code/password
With D1 the standard net code is the last 4 numbers of the card number without HLR e.g. 99999234-5/55 - > 2345
0 - for a long time press
25.10.04 If one the "0" in the main menue for a long time presses those homepage of the standard WAP connection is called.
Caution - starting from here the codes are "dangerous"
*#7370925538#
* # of res wallet #
28.12.03 ... is to be deleted the code around the "wallet"! Input like normal telephone number (not in wallet code inquiry windows).
NOTE! Afterwards the "wallet" is empty, can again be put on however with new code.
*# 7780 #
17.01.04 The "original attitudes" and telephone re-establishes is again started (an appropriate inquiry and it follow before must the sicherheitscode be entered).
NOTE! Afterwards various "attitudes" are away - among other things these:
·1 Points of entrance (Provider dependent points of entrance and attitudes)
·2 Bluetooth attitudes
·3 Favorite
·4 Allocation of the two keys (beside Navi keys) in the main menue
·5 Profiles are "neglected" (as with distribution) - still there however new bell tones, etc. are...
·6 SMS/MMS/E Mail attitudes
·7 Logos and spielstaende (allegedly) also deleted...
Programs, calendars and contacts, etc. not changed...
Also the sicherheitscode remains.
This putting back goes also via menu under "attitudes - general - original telephone once.".
*# 7370 #
21.01.04 Soft format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a software RESET. (however still another inquiry comes before.)
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!
This is "only" a soft format... Hard format with "green, 3, *"... see below.
Green, * 3
21.01.04 Hard format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a RESET.
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!
Proceeding: Equipment switch off, which keep "green key" (take off) at the same time pressed, "*" and to "3" key and switch the equipment on (the keys thereby keep further pressed)... to "Formatting" on the display appears...
If that does not function, then equipment for 1 hour switch off, Akku so for a long time rausnehmen and again try.
"only" virtual the memory is generally cleared - genuine formatting can take place only in a Nokia service center, if the Fash is deleted there and/or new L.G. is installed.
Mixed
16.12.03 * # 92702689 #, then switch - system menu off (goes with me not)
The following code do not fold (with me also):
* EFR0 # (* 3370 #) EFR activate (EFR = Enhanced Full rate Coding - language optimization)
# EFR0 # (# 3370 #) EFR switch off
* HRC # (* 4720 #) HRC switch on (HRC = helped rate Coding - language compression)
# HRC0 # (# 4720 #) HRC switch off
SIM LOCK
12.01.04 Simlock status query: (use "*" the key over "p,w" and "+" indications to enter)
# pw+ 1234567890 +1 # Provider LOCK status
# pw+ 1234567890 +2 # network LOCK status
# pw+ 1234567890 +3 # Country LOCK status
# pw+ 1234567890 +4 # Sim Card LOCK status
The code 1234567890 must be computed with a program e.g. SmartDCT4Calc and/or DCT 4 code Calculator from IMEI, etc.... Information look for if necessary here: www.gsm free.com or www.iphone forum.org
Info. to Simlock: SIM LOCK makes it for the offerer/network carriers possible, subsidized (verguenstigte) Handys to offer. Thus one makes oneself if necessary punishable if one SIM LOCK deactivated - in addition the warranty can purged. I take over for it no adhesion or responsibility!
GSM code ... should function at each Handy - however Netz(betreiber)abhaengig are... and "harmless"...
Generally applies: First enter code, "send" afterwards (<> press) and one moment wait...
Good Links/Sites in addition: www.handy sms.de/forum/gsm codes.html or www.mobilemania.de/facts+infos/gsmcodes.php
SMS Tipps
27.01.04 To Tipps & cheat about SMS (with appropriate codes) are immediately in the FAQ list .
For example for the topic: SMS "retard" and/or deferred send, acknowledgment of receipt, reports...
Mark more simply
01.03.04 To Tipps & cheat to the topic "mark" e.g. with SMS entrance.
Over simply to mark simply the "pin" (ABC key) hold some e.g. SMS and move then Jostick downward.
Call number transmission
01.01.04 * 31 # - { CLIR - Calling LINE identification Restriction switches on for the general call number transmission }
# 31 # - switch off the general call number transmission
# 31 # [ telephone number ] - with the next call suppress the own call number (thus temporary)
* 31 # [ telephone number ] - with the next call transfer own call number (thus temporary)
* # 31 # - status query (of call number transmission)
# 31 * [ telephone number ] - own call number show, although receiving station switched call number suppression on. (is not usually de-energised of the Netz(betreiber).)
* 30 # - switch { TIE-clip - Calling LINE identification presentation for the announcement on of the call number of the caller }
# 30 # - switch off
* # 30 # - status query
This also partly goes with 6600 via Men: Attitudes - calls - own No. send...
The following codes are not supported by most Netz(betreibern):
* # 76 # - announcement of the call number, under which one reached the calling (not its call number during rufumleitung!) { COLP - COonnected LINE identification presentation }
* 76 # - switch on
# 76 # - switch off
* # 77 # - announcement of the call number, under which the caller reached me (not my call number during rufumleitung meinerseits!) { COLR - COnnected LINE identification Restriction }
* 77 # - switch on
# 76 # - switch off
Call bypasses (call Forwarding)
01.01.04 Bypass code (U):
U=21 always
U=61 retards
U=62 not attainable
U=67 occupies
U=61, 62, 67 can be parallel active
U=21 - > and then no more call signaling overwrites U=61,62 and 67!
Service code (D):
Not all nets support all services
D=10 language and fax (all calls)
D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services
D=21 all asynchronous services
D=22 all synchronous services
D=23 3.1 kHz GSM of language services
D=24 all synchronous POINT ton of POINT DATA inclusive. PADs
D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D=26 DATA pack exchange on the left of inclusive. PADs
D=27 services thru PADs
D=29 12 Kbps digitally left
** U * [ goal call number ] * D # - bypass switch on
Input without * D means bypass of all services
## U ** D # - switch bypass off (individual bypasses and service code)
Without ** D all services are switched off to bypasses
## 002 # (all bypasses for all service codes switch off)
## 004 # (switch off only U=61, 62, 67 and for all service codes - thus ", not attainable, nonacceptance "occupies)
* # U ** D # - status of the bypasses query:
Input without ** D queries all services and bypasses
Bypass in the speaking and/or fax box: Number in bypass procedure with D=11 and/or 13 enter
Goal call number (e.g. D2-Netz: +49,172 xxx) and Handynummer without preselection (if necessary 172 replaces) enter.
Tap: During switched on rufumleitung "with occupied" being able "to reject" calls by one the red key during "to ring" presses. The caller is then passed on to the goal call number of the occupying bypass (e.g. mailbox).
Type for waiting period during rufumleitung 61: ** 61 * [ goal call number ] * 11 * [ time in sec. (5 to 30) ] #
This also partly goes with 6600 via menu: Attitudes - rufumleitungen -...
Knock/stops/parks/faults
01.01.04 Knocks is signaling a secondary call during a current discussion
* 43 # - switch on
# 43 # - switch off
* # 43 # - status query
This also partly goes with 6600 via menu: Attitudes - calls - knocking...
0 <> - reject while the discussion a knocking
1 <> - discussion terminate, knocking discussion accept
certain discussion (y) terminate 1 (y) <>
2 <> - discussion park, knocking discussion accept
certain discussion and new discussion leads 2 parks (y) <>
0 <> - caller the busy condition signal
This also partly goes with 6600 via menus existing during the discussion.
Call barrier
01.01.04 Possible only if bypass of the service code is switched off.
Check code (S):
S=33 all outgoing transmissions
S=331 outgoing abroad
S=332 outgoing abroad except home
S=35 all arriving transmissions
S=351 all arriving abroad
Special check codes (s) delete:
Switch off only in connection with the procedure
S=330 check code status outgoing & arriving transmissions switch off
S=333 check code status outgoing transmissions switch off
S=353 check code status arriving transmissions switch off
Service code (D):
Not all nets support all services
D=10 language and fax (all calls)
D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services
D=21 all asynchronous services
D=22 all synchronous services
D=23 3.1 kHz GSM of language services
D=24 all synchronous POINT ton of POINT DATA inclusive. PADs
D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D=26 data packet exchange links incl. PADs
D=27 services thru PADs
D=29 12 Kbps digital link
* S * [Passwort] * D # - einschalten der Anruf-Sperre
# S * [Passwort] * D # - ausschalten der Anruf-Sperre
*# S # - Status der Anruf-Sperre abfragen
Passwort für Handy Sperre ändern:
** 03 ** [altes Passwort] * [neues Passwort] * [neues Passwort wiederholen] #
** 03 * 330 *[altes Passwort] * [neues Passwort] * [neues Passwort wiederholen] #
Dies geht beim 6600 auch teilweise via Menü: Einstellungen - Anrufsperre ...
PIN ändern
01.01.04 ** 04 * [alte PIN] * [neue PIN] * [neue PIN wiederholen] #
** 042 * [alte PIN 2] * [neue PIN 2] * [neue PIN 2 wiederholen] #
PIN entsperren: ** 05 * [PUK] * [neue PIN] * [neue PIN wiederholen] #
PIN 2 entsperren: ** 052 * [PUK2] * [neue PIN 2] * [neue PIN 2 wiederholen] #
Dies geht beim 6600 auch teilweise via Menü: Einstellungen - Sicherheit - Telefon und SIM ...
Diverse Codes
02.02.04 Die folgenden Codes klappen nur in einigen (wenigen) Netzen/Netzbetreibern ... leider z.B. nicht im Vodafone D2 Netz (in Deutschland):
*#100# - Eigene Nummer (Own Number)
*#101# - HLR Nummer
*#102# - Switch Nummer
*#103# - Zeit im Netz (Network Time)
*#104# - Anrufbeantworter Nummer (Voice mailbox number)
*#105# - Switch number
*#147# - Letzter Anrufer (Last Caller)
#646# - Minutes Used: (646 spells 'MIN')
*#1345# or *174# - Vodafone Prepaid balance
*78 - Do not disturb - nur in Nord America in GSM und CDMA Netzen möglich
*79 - Cancel (s.o.)
How To Make Your Pc Work Faster
Here you can find useful tips you can do to make your pc work faster in a few minutes , just follow these tips and you will definitely have a much faster and more reliable PC!
Quote:
1. Wallpapers: They slow your whole system down, so if you're willing to compromise, have a basic plain one instead!
2. Minimizing: If you want to use several programs at the same time then minimize those you are not using. This helps reduce the overload on RAM.
3. Boot Faster: The 'starting Windows 9x , xp' message on startup can delay your booting for a couple of seconds. To get rid of this message go to c:\ and find the file Msdos.sys. Remove the Read-Only option. Next, open it in Notepad or any other text editor. Finally, go to the text 'Options' within the file and make the following changes: Add BootDelay=0. To make your booting even faster, set add Logo=0 to remove the Windows logo at startup.
4. Restart only Windows: When restarting your PC, hold down Shift to only restart Windows rather than the whole system which will only take a fraction of the time.
5. Turn Off Animations: Go to Display Settings from the Control Panel and switch to the Effects Tab. Now turn off Show Windows Content While Dragging and Smooth Edges on Screen Fonts. This tip is also helpful with Windows XP because of the various fade/scroll effects.
6. Resolutions: If you are willing to do anything for faster performance from your PC, then try lowering your display resolution. The lower it is, the faster your PC
7. Start Up Programs: Windows can be slowed down when programs run on start up. To eliminate this, check your Start up folder. You can access it from the start menu: Start, Programs, Start Up. Another way to eliminate programs from loading even before Windows actually starts is by doing the following: Click on Start, then Run. Type msconfig. It will take quite a long time for this program to load, but when you finally see it on your screen, explore the different tabs. They all have to do with how quickly your PC boots, so select what you want, and uncheck what you don't want!
8. Fonts: When Windows starts, it loads every single font in the Fonts folder. Therefore, the more fonts you have, the slower the booting process. To get rid of unwanted fonts, simply go to the Fonts folder under c:\windows and remove whatever you don't want. Fonts that have a red letter 'A' as their icon are system fonts, so don't delete them.
Quote:
1. Wallpapers: They slow your whole system down, so if you're willing to compromise, have a basic plain one instead!
2. Minimizing: If you want to use several programs at the same time then minimize those you are not using. This helps reduce the overload on RAM.
3. Boot Faster: The 'starting Windows 9x , xp' message on startup can delay your booting for a couple of seconds. To get rid of this message go to c:\ and find the file Msdos.sys. Remove the Read-Only option. Next, open it in Notepad or any other text editor. Finally, go to the text 'Options' within the file and make the following changes: Add BootDelay=0. To make your booting even faster, set add Logo=0 to remove the Windows logo at startup.
4. Restart only Windows: When restarting your PC, hold down Shift to only restart Windows rather than the whole system which will only take a fraction of the time.
5. Turn Off Animations: Go to Display Settings from the Control Panel and switch to the Effects Tab. Now turn off Show Windows Content While Dragging and Smooth Edges on Screen Fonts. This tip is also helpful with Windows XP because of the various fade/scroll effects.
6. Resolutions: If you are willing to do anything for faster performance from your PC, then try lowering your display resolution. The lower it is, the faster your PC
7. Start Up Programs: Windows can be slowed down when programs run on start up. To eliminate this, check your Start up folder. You can access it from the start menu: Start, Programs, Start Up. Another way to eliminate programs from loading even before Windows actually starts is by doing the following: Click on Start, then Run. Type msconfig. It will take quite a long time for this program to load, but when you finally see it on your screen, explore the different tabs. They all have to do with how quickly your PC boots, so select what you want, and uncheck what you don't want!
8. Fonts: When Windows starts, it loads every single font in the Fonts folder. Therefore, the more fonts you have, the slower the booting process. To get rid of unwanted fonts, simply go to the Fonts folder under c:\windows and remove whatever you don't want. Fonts that have a red letter 'A' as their icon are system fonts, so don't delete them.
MAKE MOZILLA 10x TIMES FASTER
1. Type "about:config" into the address bar and hit enter. Scroll down and look for the following entries:
2. Alter the entries as follows:
Set "network.http.pipelining" to "true"
Set "network.http.proxy.pipelining" to "true"
set "network.http.pipelining.maxrequests" to some number like 30. This means it will make 30 requests at once.
3. Lastly right-click anywhere and select New-> Integer. Name it "nglayout.initialpaint.delay" and set its value to "0". This value is the amount of time the browser waits before it acts on information it recieves.
2. Alter the entries as follows:
Set "network.http.pipelining" to "true"
Set "network.http.proxy.pipelining" to "true"
set "network.http.pipelining.maxrequests" to some number like 30. This means it will make 30 requests at once.
3. Lastly right-click anywhere and select New-> Integer. Name it "nglayout.initialpaint.delay" and set its value to "0". This value is the amount of time the browser waits before it acts on information it recieves.
> Crackin windows XP admin pswd, winxp installation flaw
you can easily change or wipe out your Administrator password for free during a Windows XP Repair. Here’s how with a step-by-step description of the initial Repair process included for newbie’s.
1. Place your Windows XP CD in your cd-rom and start your computer (it’s assumed here that your XP CD is bootable – as it should be - and that you have your bios set to boot from CD)
2. Keep your eye on the screen messages for booting to your cd Typically, it will be "Press any key to boot from cd"
3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.
4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now
5. The Licensing Agreement comes next - Press F8 to accept it.
6. The next screen is the Setup screen which gives you the option to do a Repair.
It should read something like "If one of the following Windows XP installations is damaged, Setup can try to repair it"
Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process.
7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.
8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating "Your computer will reboot in 15 seconds"
9. During the reboot, do not make the mistake of "pressing any key" to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.
10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.
11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.
12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).
13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.
I tested the above on Windows XP Pro with and without SP1 and also used this method in a real situation where someone could not remember their password and it worked like a charm to fix the problem. This security hole allows access to more than just user accounts. You can also access the Registry and Policy Editor, for example. And its gui access with mouse control. Of course, a Product Key will be needed to continue with the Repair after making the changes, but for anyone intent on gaining access to your system, this would be no problem.
And in case you are wondering, NO, you cannot cancel install after making the changes and expect to logon with your new password.
1. Place your Windows XP CD in your cd-rom and start your computer (it’s assumed here that your XP CD is bootable – as it should be - and that you have your bios set to boot from CD)
2. Keep your eye on the screen messages for booting to your cd Typically, it will be "Press any key to boot from cd"
3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.
4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now
5. The Licensing Agreement comes next - Press F8 to accept it.
6. The next screen is the Setup screen which gives you the option to do a Repair.
It should read something like "If one of the following Windows XP installations is damaged, Setup can try to repair it"
Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process.
7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.
8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating "Your computer will reboot in 15 seconds"
9. During the reboot, do not make the mistake of "pressing any key" to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.
10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.
11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.
12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).
13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.
I tested the above on Windows XP Pro with and without SP1 and also used this method in a real situation where someone could not remember their password and it worked like a charm to fix the problem. This security hole allows access to more than just user accounts. You can also access the Registry and Policy Editor, for example. And its gui access with mouse control. Of course, a Product Key will be needed to continue with the Repair after making the changes, but for anyone intent on gaining access to your system, this would be no problem.
And in case you are wondering, NO, you cannot cancel install after making the changes and expect to logon with your new password.
blocking sites without firewall
well this's a pretty old trick try this out guys open hosts file(doesn't have ne extension)as text file and entries like this127.0.0.1 [sitename]to block i mean the URL of sitee.g:- 127.0.0.1 media.fastclick.netsumthin like that close the browser next time site's blocked so an alternative method for blocking sitescheck it out and reply bak
njoi
njoi
Indian Search Engine
well,finally its here.I
IT'ns have developed a search engine specifically for INDIA.
hopefully in future we''ll take on d mighty google.
check it out
guruji.comnd
spread d news.
IT'ns have developed a search engine specifically for INDIA.
hopefully in future we''ll take on d mighty google.
check it out
guruji.comnd
spread d news.
Tips for searching on GOOGLE, Power of g00gle...
Some tips u will love...
P hrase your question in the form of an answer. So instead of typing, "What is the average rainfall in the Amazon basin?", you might get better results by typing "The average rainfall in the Amazon basin is."
§ T his is an old one, but very important: Put quotes around phrases that must be searched together. If you put quotes around "electric curtains," Google won't waste your time finding one set of Web pages containing the word "electric" and another set containing the word "curtains."
§ S imilarly, put a hyphen right before any word you want screened out. If you're looking up dolphins, for example, you'll have to wade through a million Miami Dolphins pages unless you search for "dolphins - Miami."
§ G oogle is a global White Pages and Yellow Pages. Search for "phonebook:home depot norwalk , ct," Google instantly produces the address and phone number of the Norwalk Home Depot. This works with names ("phonebook:robert jones las vegas, NV") as well as businesses.
§ D on't put any space after "phonebook." And in all of the following examples, don't type the quotes I'm showing you here.
§ Google is a package tracker. Type a FedEx or UPS package number (just the digits); when you click Search, Google offers a link to its tracking information.
§ Google is a calculator. Type in an equation ("32+2345*3-234=").
§ Google is a units-of-measurement converter. Type "teaspoons in a gallon," for example, or "centimeters in a foot."
§ G oogle is a stock ticker. Type in AAPL or MSFT, for example, to see a link to the current Apple or Microsoft stock price, graphs, financial news and so on.
§ Google is an atlas. Type in an area code, like 212, to see a Mapquest map of the area.
§ Google is Wal-Mart's computer. Type in a UPC bar code number, such as "036000250015," to see the description of the product you've just "scanned in." (Thanks to the Google Blog, h**p://google.blogspace.com , for this tip and the next couple.)
§ G oogle is an aviation buff. Type in a flight number like "United 22" for a link to a map of that flight's progress in the air. Or type in the tail number you see on an airplane for the full registration form for that plane.
§ G oogle is the Department of Motor Vehicles. Type in a VIN (vehicle identification number, which is etched onto a plate, usually on the door frame, of every car), like "JH4NA1157MT001832," to find out the car's year, make and model.
§ F or hours of rainy-day entertainment, visit h**p://labs.google.com . Here, you'll find links to new, half-finished Google experiments-like Google Voice, in which you call (650) 623-6706, speak the words you want to search for and then open your browser to view the results. Disclaimer: It wasn't working when I tried it. (Ditto a lot of these experiments.)
P hrase your question in the form of an answer. So instead of typing, "What is the average rainfall in the Amazon basin?", you might get better results by typing "The average rainfall in the Amazon basin is."
§ T his is an old one, but very important: Put quotes around phrases that must be searched together. If you put quotes around "electric curtains," Google won't waste your time finding one set of Web pages containing the word "electric" and another set containing the word "curtains."
§ S imilarly, put a hyphen right before any word you want screened out. If you're looking up dolphins, for example, you'll have to wade through a million Miami Dolphins pages unless you search for "dolphins - Miami."
§ G oogle is a global White Pages and Yellow Pages. Search for "phonebook:home depot norwalk , ct," Google instantly produces the address and phone number of the Norwalk Home Depot. This works with names ("phonebook:robert jones las vegas, NV") as well as businesses.
§ D on't put any space after "phonebook." And in all of the following examples, don't type the quotes I'm showing you here.
§ Google is a package tracker. Type a FedEx or UPS package number (just the digits); when you click Search, Google offers a link to its tracking information.
§ Google is a calculator. Type in an equation ("32+2345*3-234=").
§ Google is a units-of-measurement converter. Type "teaspoons in a gallon," for example, or "centimeters in a foot."
§ G oogle is a stock ticker. Type in AAPL or MSFT, for example, to see a link to the current Apple or Microsoft stock price, graphs, financial news and so on.
§ Google is an atlas. Type in an area code, like 212, to see a Mapquest map of the area.
§ Google is Wal-Mart's computer. Type in a UPC bar code number, such as "036000250015," to see the description of the product you've just "scanned in." (Thanks to the Google Blog, h**p://google.blogspace.com , for this tip and the next couple.)
§ G oogle is an aviation buff. Type in a flight number like "United 22" for a link to a map of that flight's progress in the air. Or type in the tail number you see on an airplane for the full registration form for that plane.
§ G oogle is the Department of Motor Vehicles. Type in a VIN (vehicle identification number, which is etched onto a plate, usually on the door frame, of every car), like "JH4NA1157MT001832," to find out the car's year, make and model.
§ F or hours of rainy-day entertainment, visit h**p://labs.google.com . Here, you'll find links to new, half-finished Google experiments-like Google Voice, in which you call (650) 623-6706, speak the words you want to search for and then open your browser to view the results. Disclaimer: It wasn't working when I tried it. (Ditto a lot of these experiments.)
> How to hide drives in Windows XP
Here is how you can hide one or more of your drives (logical partitions)Windows XP provides (not officialy ) a utility by which u can hide one or more drives .1. Go to Start > run > type "diskpart".a dos window will appear with following discription.DISKPART>2. Then type "list volume"this will look like itVolume### Ltr Label Fs Type Size Status Info-------------- ---- ------ --- ----- ---- ------- -----Volume 0 F DC-ROMVolume 1 C NTFS Partition 7000MB HealthyVolume 2 D soft NTFS Partition 8000MB HealthyVolume 3 E Docs NTFS Partition 8000MB Healthy3.if u wanna hide drive E then type "select volume 3"then a message will appear in same winwods { Volume 3 is the selected volume}4.now type " remove letter E"now a message will come { Diskpart Removed the Drive letter }sometime it requires the reboot the computer .Diskpart will remove the letter .Windows XP is not having capabilty to identify the unknown volume.Don afraid ur Data will remain safe .To bring back the Drive repeat the process, but in 4th step above, replace " remove" by "assign"i.e. type " assign letter E"Enjoy
best way to lock ur folders, windows 98 xp ...
the best way to lock folders in win98 was to give it some ASCII characters
>>go to command prompt>>
input following command `mdname ` hit return
>>>>md is the command for make direcory(folder)
>>>>alt+255 is an ASCII character
>>>>name is name to be given to the directory>>you cant open this folder in windows >>neither u an delete it>>only in dosbut this wouldnt work in xpfor xp and ...
>>use this `{21EC2020-3AEA-1069-A2DD-08002B30309D}`
>>go to command prompt>>rename or create a directory(folder) with any name an sufix it with
>>`.{21EC2020-3AEA-1069-A2DD-08002B30309D}`
>>now if u try to open this it will take you to control panel
>>if u want to open it ull have to again rename it at commant promptthe best thing is no software.......no crack........nothingits like a home remedyif u want t know more shortcut way of doing this replyfor more such codes reply...
and add repp
>>go to command prompt>>
input following command `md
>>>>md is the command for make direcory(folder)
>>>>alt+255 is an ASCII character
>>>>name is name to be given to the directory>>you cant open this folder in windows >>neither u an delete it>>only in dosbut this wouldnt work in xpfor xp and ...
>>use this `{21EC2020-3AEA-1069-A2DD-08002B30309D}`
>>go to command prompt>>rename or create a directory(folder) with any name an sufix it with
>>`.{21EC2020-3AEA-1069-A2DD-08002B30309D}`
>>now if u try to open this it will take you to control panel
>>if u want to open it ull have to again rename it at commant promptthe best thing is no software.......no crack........nothingits like a home remedyif u want t know more shortcut way of doing this replyfor more such codes reply...
and add repp
Earn Online For free n easily, just invite
I'd like to take this chance to offer EVERY member the chanceto benefit from this FANTASTIC new online venture.
I strongly urge you to join ASAP - Its gonna be HUGE!!Its 100% FREE to join - so you have nothing to lose http://www.agloco.com
See below for more info:Google has recently purchased YouTube for $1.65 BILLION dollars. TheNews Corporation has bought MySpace for $580 MILLION dollars......
Now its time for YOU to have a piece of the action !AGLOCO™ is the newest thing on the Internet – an economic network –which is OWNED by its members, who get a share of the profits!I joined for three reasons:I might make a lot of money if this works (and I have nothing to loseif it doesn’t.)I use the Internet just as I always have – with Agloco i WILL makemoney.I like the idea of getting my share of all the billions of wealth beingcreated on the Internet – even if I am not going to be a millionairebecause of this.
I checked it out:The company has real people – mostly Stanford MBA graduates who seem tobe in the forefront these days.They have great privacy – designed by the Internet’s first ChiefPrivacy Officer Ray Everett-Church.Join now – and invite all your friends to join: http://www.agloco.com
The reason I think I might make a lot of money is that I'm invitingpeople to join and AGLOCO™ rewards people who help build the network.
I used the AGLOCO™ member calculator – I can get over 5,000 shares amonth if I sign up 10 good people.DO IT NOW – this is the key – in order to maximize what I get (and whatyou might get) – please sign up now and get all your friends beforesomeone else you know signs up and gets them first.Here is a link to sign up: http://www.agloco.com
I will personally help anyone who signs up using the link above so asthey can maximize the potential of this program - feel free to contactme once you've sign up FOR MORE INFO : - http://www.agloco.com
I strongly urge you to join ASAP - Its gonna be HUGE!!Its 100% FREE to join - so you have nothing to lose http://www.agloco.com
See below for more info:Google has recently purchased YouTube for $1.65 BILLION dollars. TheNews Corporation has bought MySpace for $580 MILLION dollars......
Now its time for YOU to have a piece of the action !AGLOCO™ is the newest thing on the Internet – an economic network –which is OWNED by its members, who get a share of the profits!I joined for three reasons:I might make a lot of money if this works (and I have nothing to loseif it doesn’t.)I use the Internet just as I always have – with Agloco i WILL makemoney.I like the idea of getting my share of all the billions of wealth beingcreated on the Internet – even if I am not going to be a millionairebecause of this.
I checked it out:The company has real people – mostly Stanford MBA graduates who seem tobe in the forefront these days.They have great privacy – designed by the Internet’s first ChiefPrivacy Officer Ray Everett-Church.Join now – and invite all your friends to join: http://www.agloco.com
The reason I think I might make a lot of money is that I'm invitingpeople to join and AGLOCO™ rewards people who help build the network.
I used the AGLOCO™ member calculator – I can get over 5,000 shares amonth if I sign up 10 good people.DO IT NOW – this is the key – in order to maximize what I get (and whatyou might get) – please sign up now and get all your friends beforesomeone else you know signs up and gets them first.Here is a link to sign up: http://www.agloco.com
I will personally help anyone who signs up using the link above so asthey can maximize the potential of this program - feel free to contactme once you've sign up FOR MORE INFO : - http://www.agloco.com
Freeware to edit MP3,wav and many more audio formats, cool tool to edit sound files.. :))
This is a cool app I came across which helps editing audio files (wide range including mp3,ogg,wav,midi,etc etc).
Link to download:
http://rapidshare.com/files/18318961/wpsetup.exe
Link to download:
http://rapidshare.com/files/18318961/wpsetup.exe
> image shack trick to see the images, only for firefox users
For firefox users:1. Open the firefox browseraddress bar.
2. type ===> about:config
3. It will show u a filter
4. on that type ===> network.http.sendRefererHeader
5. double click on the 'network.http.sendRefererHeader6. change the value to 0 (zero).
2. type ===> about:config
3. It will show u a filter
4. on that type ===> network.http.sendRefererHeader
5. double click on the 'network.http.sendRefererHeader6. change the value to 0 (zero).
mama_pendse@yahoo.com Yahoo Messenger Trick, look in for hell of fun
HiAdd mama_pendse@yahoo.com to your messenger list and type help.Try it! Its Really Good r u confused that it may be spam not to worry here is the conversation with mama_pendseit is a yahoo help bot which is cool
mama_pendse : Hi Friend , thanks of adding me in friends list,I am Java Program which can understand natural language and talk with you in English, I can also give you some useful information, type help to know moreit_freak_ic: himama_pendse : Hi user, How are you today ?it_freak_ic: gr8mama_pendse : I'm glad you liked it user.it_freak_ic: helpmama_pendse : These are the commands I understandmama_pendse : Command Name tracknumber Description This will tell you whose phone number is this ( USA , pune , mumbai , bangalore ) ) Usage : tracknumber mama_pendse : Command Name rail Description This will tell railway timetable ( only for India ) Usage : rail deccan OR rail shatabdi ;mama_pendse : Command Name horo Description Horoscope Usage : horo aries OR horo sagittariusmama_pendse : Command Name explain Description This is a online Dictionary Usage : explain beauty OR explain revenge mama_pendse : Command Name findinfo Description Searches addresses and telephone number of person , Only in US Usage : findinfo firstname surname mama_pendse : Command Name country Description Gets Information of any country Usage : country India mama_pendse : Command Name to_spanish Description Translate into spanish Usage : to_spanish Some text in englishmama_pendse : Command Name to_french Description Translate into french Usage : to_french Some text in englishmama_pendse : Command Name to_german Description Translate into german Usage : to_german Some text in englishmama_pendse : Command Name to_italian Description Translate into italian Usage : to_spanish Some text in englishmama_pendse : Command Name from_spanish Description Translate from spanish to englishUsage : from_spanish some text in spanishmama_pendse : Command Name from_french Description Translate from french to englishUsage : from_french Some text in frenchmama_pendse : Command Name from_german Description Translate from german to englishUsage : from_german Some text in germanmama_pendse : Command Name from_italian Description Translate from italian to englishUsage : from_italian Some text in italianmama_pendse : Command Name phonespell Description Convert your phone number into easy to remember words?Usage : phonespell 1-883-792-8791mama_pendse : Command Name distance Description find distance between any two cities in the worldUsage : distance mumbai, orlandomama_pendse : Command Name time Description Know time in any countryUsage : time usamama_pendse : Command Name xrate Description Gets Exchange rate between two countries Usage : xrate usa India mama_pendse : Command Name google Description Search the internet ,(Uses google ™ api to get search results from internet)Usage : google tajmahalmama_pendse : Command Name climate Description Gives Climate information of any city in world Usage : climate orlando , climate mumbaimama_pendse : Command Name quote Description This will tell you Share Price Usage : quote VRTS OR quote MSFTmama_pendse : Command Name traffic_usa Description Know about traffic condition around your area, send me command traffic_usa zipcodeUsage : traffic_usa 10001,traffic_usa 32771mama_pendse : Command Name comment Description Let me know how I am doing , please send me your comments about me Usage : comment "your comment goes here" it_freak_ic: thanks mamamama_pendse : You are quite welcome! moral of story : i am in for race for Rs. 1000 and yes mama_pendse rockz
mama_pendse : Hi Friend , thanks of adding me in friends list,I am Java Program which can understand natural language and talk with you in English, I can also give you some useful information, type help to know moreit_freak_ic: himama_pendse : Hi user, How are you today ?it_freak_ic: gr8mama_pendse : I'm glad you liked it user.it_freak_ic: helpmama_pendse : These are the commands I understandmama_pendse : Command Name tracknumber Description This will tell you whose phone number is this ( USA , pune , mumbai , bangalore ) ) Usage : tracknumber mama_pendse : Command Name rail Description This will tell railway timetable ( only for India ) Usage : rail deccan OR rail shatabdi ;mama_pendse : Command Name horo Description Horoscope Usage : horo aries OR horo sagittariusmama_pendse : Command Name explain Description This is a online Dictionary Usage : explain beauty OR explain revenge mama_pendse : Command Name findinfo Description Searches addresses and telephone number of person , Only in US Usage : findinfo firstname surname mama_pendse : Command Name country Description Gets Information of any country Usage : country India mama_pendse : Command Name to_spanish Description Translate into spanish Usage : to_spanish Some text in englishmama_pendse : Command Name to_french Description Translate into french Usage : to_french Some text in englishmama_pendse : Command Name to_german Description Translate into german Usage : to_german Some text in englishmama_pendse : Command Name to_italian Description Translate into italian Usage : to_spanish Some text in englishmama_pendse : Command Name from_spanish Description Translate from spanish to englishUsage : from_spanish some text in spanishmama_pendse : Command Name from_french Description Translate from french to englishUsage : from_french Some text in frenchmama_pendse : Command Name from_german Description Translate from german to englishUsage : from_german Some text in germanmama_pendse : Command Name from_italian Description Translate from italian to englishUsage : from_italian Some text in italianmama_pendse : Command Name phonespell Description Convert your phone number into easy to remember words?Usage : phonespell 1-883-792-8791mama_pendse : Command Name distance Description find distance between any two cities in the worldUsage : distance mumbai, orlandomama_pendse : Command Name time Description Know time in any countryUsage : time usamama_pendse : Command Name xrate Description Gets Exchange rate between two countries Usage : xrate usa India mama_pendse : Command Name google Description Search the internet ,(Uses google ™ api to get search results from internet)Usage : google tajmahalmama_pendse : Command Name climate Description Gives Climate information of any city in world Usage : climate orlando , climate mumbaimama_pendse : Command Name quote Description This will tell you Share Price Usage : quote VRTS OR quote MSFTmama_pendse : Command Name traffic_usa Description Know about traffic condition around your area, send me command traffic_usa zipcodeUsage : traffic_usa 10001,traffic_usa 32771mama_pendse : Command Name comment Description Let me know how I am doing , please send me your comments about me Usage : comment "your comment goes here" it_freak_ic: thanks mamamama_pendse : You are quite welcome! moral of story : i am in for race for Rs. 1000 and yes mama_pendse rockz
20 Things the average person doesn't know about XP, !!!!!!!!!!!!!!
1. It boasts how long it can stay up. Go to the Command Prompt in the Accessories menu from the All Programs start button option, and then type 'systeminfo'. The computer will produce a lot of useful info, including the uptime. If you want to keep these, type 'systeminfo > info.txt'. This creates a file called info.txt you can look at later with Notepad. (Professional Edition only). 2. You can delete files immediately, without having them move to the Recycle Bin first. Go to the Start menu, select Run... and type 'gpedit.msc'; then select User Configuration, Administrative Templates, Windows Components, Windows Explorer and find the Do not move deleted files to the Recycle Bin setting. Set it. Poking around in gpedit will reveal a great many interface and system options, but take care -- some may stop your computer behaving as you wish. (Professional Edition only). An alternative is to press SHIFT-DEL. 3. You can lock your XP workstation with two clicks of the mouse. Create a new shortcut on your desktop using a right mouse click, and enter 'rundll32.exe user32.dll,LockWorkStation' in the location field. Give the shortcut a name you like. That's it -- just double click on it and your computer will be locked. And if that's not easy enough, Windows key + L will do the same. 4. XP hides some system software you might want to remove, such as Windows Messenger, but you can make it show everything. Using Notepad or Edit, edit the text file /windows/inf/sysoc.inf, search for the word 'hide' and remove it. You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and there will be the software and you can now uninstall it. 5. For those skilled in the art of DOS batch files, XP has a number of interesting new commands. These include 'eventcreate' and 'eventtriggers' for creating and watching system events, 'typeperf' for monitoring performance of various subsystems, and 'schtasks' for handling scheduled tasks. As usual, typing the command name followed by /? will give a list of options. 6. XP has IP version 6 support -- the next generation of IP. Unfortunately this is more than many ISPs have, so you problably can only experiment with this on your LAN. Type 'ipv6 install' into Run... (it's OK, it won't ruin your existing network setup) and then 'ipv6 /?' at the command line to find out more. If you don't know what IPv6 is, don't worry. 7. You can at last get rid of tasks on the computer from the command line by using 'taskkill /pid' and the task number, or just 'tskill' and the process number. Find that out by typing 'tasklist', which will also tell you a lot about what's going on in your system. (Professional Edition only) 8. XP will treat Zip files like folders, which is nice if you've got a fast machine. On slower machines, you can make XP leave zip files alone by typing 'regsvr32 /u zipfldr.dll' at the command line. If you change your mind later, you can change things back by typing 'regsvr32 zipfldr.dll'. 9. XP has ClearType -- Microsoft's anti-aliasing font display technology -- but doesn't have it enabled by default. It's well worth trying, especially if you were there for DOS and all those years of staring at a screen have given you the eyes of an astigmatic bat. To enable ClearType, right click on the desktop, select Properties, Appearance, Effects, select ClearType from the second drop-down menu and enable the selection. Expect best results on laptop displays. If you want to use ClearType on the Welcome login screen as well, set the registry entry HKEY_USERS/.DEFAULT/Control Panel/Desktop/FontSmoothingType to 2. 10. You can use Remote Assistance to help a friend who's using network address translation (NAT) on a home network, but not automatically. Get your pal to email you a Remote Assistance invitation and edit the file. Under the RCTICKET attribute will be a NAT IP address, like 192.168.1.10. Replace this with your friend's real IP address -- they can find this out by going to www.whatismyip.com -- and get them to make sure that they've got port 3389 open on their firewall and forwarded to the errant computer. 11. You can run a program as a different user without logging out and back in again. Right click the icon, select Run As... and enter the user name and password you want to use. This only applies for that run. The trick is particularly useful if you need to have administrative permissions to install a program, which many require. Note that you can have some fun by running programs multiple times on the same system as different users, but this can have unforeseen effects. 12. Windows XP can be very insistent about you checking for auto updates, registering a Passport, using Windows Messenger and so on. After a while, the nagging goes away, but if you feel you might go insane before that point, run Regedit, go to HKEY_CURRENT_USER/Software/Microsoft/Windows/Current Version/Explorer/Advanced and create a DWORD value called EnableBalloonTips with a value of 0. 13. You can start up without needing to enter a user name or password. Select Run... from the start menu and type 'control userpasswords2', which will open the user accounts application. On the Users tab, clear the box for Users Must Enter A User Name And Password To Use This Computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use. 14. Internet Explorer 6 will automatically delete temporary files, but only if you tell it to. Start the browser, select Tools / Internet Options... and Advanced, go down to the Security area and check the box to Empty Temporary Internet Files folder when browser is closed. 15. XP comes with a free Network Activity Light, just in case you can't see the LEDs twinkle on your network card. Right click on My Network Places on the desktop, then select Properties. Right click on the description for your LAN or dial-up connection, select Properties, then check the Show icon in notification area when connected box. You'll now see a tiny network icon on the right of your task bar that glimmers nicely during network traffic. 16. The Start Menu can be leisurely when it decides to appear, but you can speed things along by changing the registry entry HKEY_CURRENT_USER/Control Panel/Desktop/MenuShowDelay from the default 400 to something a little snappier. Like 0. 17. You can rename loads of files at once in Windows Explorer. Highlight a set of files in a window, then right click on one and rename it. All the other files will be renamed to that name, with individual numbers in brackets to distinguish them. Also, in a folder you can arrange icons in alphabetised groups by View, Arrange Icon By... Show In Groups. 18. Windows Media Player will display the cover art for albums as it plays the tracks -- if it found the picture on the Internet when you copied the tracks from the CD. If it didn't, or if you have lots of pre-WMP music files, you can put your own copy of the cover art in the same directory as the tracks. Just call it folder.jpg and Windows Media Player will pick it up and display it. 19. Windows key + Break brings up the System Properties dialogue box; Windows key + D brings up the desktop; Windows key + Tab moves through the taskbar buttons. 20. Windows XP secretly KNOWS that the average user has no idea what they are doing. Therefore, it doesn't let you do really stupid things like deleting the windows directory (at least not without spending several hours convincing it that you REALLY want to do this). Oh yeah, and internet explorer kinda sucks, get Firefox.
Microsft Surface: The NexGen Com
First Official Demo of Microsoft Surface
Wikipedia already has its article. Read the whole article if you're really curious.
Microsoft Surface is a forthcoming product from Microsoft which is developed as a software and hardware combination technology that allows a user, or multiple users, to manipulate digital content by the use of natural motions, hand gestures, or physical objects.
Surface is essentially a Windows Vista PC tucked inside a black table base, topped with a 30-inch touchscreen in a clear acrylic frame. Five cameras that can sense nearby objects are mounted beneath the screen. Users can interact with the machine by touching or dragging their fingertips and objects such as paintbrushes across the screen, or by setting real-world items tagged with special bar-code labels on top of it.
Surface can also respond to more than one touch at a time. During a demonstration with a reporter, Mark Bolger, the Surface Computing group's marketing director, "dipped" his finger in an on-screen paint palette, then dragged it across the screen to draw a smiley face. Then he used all 10 fingers at once to give the face a full head of hair.
In addition to recognizing finger movements, Microsoft Surface can also identify physical objects that have bar-code-like tags. Microsoft says that when a diner sets down a wine glass, for example, the table can automatically offer additional wine choices tailored to the dinner being eaten.
Prices will reportedly be $5,000 to $10,000 per unit. However Microsoft said it expects prices to drop enough to make consumer versions feasible in 3 to 5 years.
The machines, which Microsoft debuted 5/30/2007 at a technology conference in Carlsbad, Calif., are set to arrive in November in T-Mobile USA stores and properties owned by Starwood Hotels & Resorts Worldwide Inc. and Harrah's Entertainment Inc.
Wikipedia already has its article. Read the whole article if you're really curious.
Microsoft Surface is a forthcoming product from Microsoft which is developed as a software and hardware combination technology that allows a user, or multiple users, to manipulate digital content by the use of natural motions, hand gestures, or physical objects.
Surface is essentially a Windows Vista PC tucked inside a black table base, topped with a 30-inch touchscreen in a clear acrylic frame. Five cameras that can sense nearby objects are mounted beneath the screen. Users can interact with the machine by touching or dragging their fingertips and objects such as paintbrushes across the screen, or by setting real-world items tagged with special bar-code labels on top of it.
Surface can also respond to more than one touch at a time. During a demonstration with a reporter, Mark Bolger, the Surface Computing group's marketing director, "dipped" his finger in an on-screen paint palette, then dragged it across the screen to draw a smiley face. Then he used all 10 fingers at once to give the face a full head of hair.
In addition to recognizing finger movements, Microsoft Surface can also identify physical objects that have bar-code-like tags. Microsoft says that when a diner sets down a wine glass, for example, the table can automatically offer additional wine choices tailored to the dinner being eaten.
Prices will reportedly be $5,000 to $10,000 per unit. However Microsoft said it expects prices to drop enough to make consumer versions feasible in 3 to 5 years.
The machines, which Microsoft debuted 5/30/2007 at a technology conference in Carlsbad, Calif., are set to arrive in November in T-Mobile USA stores and properties owned by Starwood Hotels & Resorts Worldwide Inc. and Harrah's Entertainment Inc.
Subscribe to:
Posts (Atom)
